SUEZ AG4040TM ; 4"x40" 2300 GPD Replacement Reverse Osmosis Membrane - Tap/Brackish Water (Veolia)

The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. These elements allow moderate energy savings, and are considered a standard in the industry. AG4040TF High Rejection Brackish Water elements feature a tape outer wrap and 28 mil feed spacers. This element is designed with male end connections.
Element Specifications

Model Flow Active Area Avg. Rejection Min. Rejection Part Number
AG4040TM 2,400 GPD 85 ft2 99.5% 99% 3032514
3032513
Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77°F (25°C), 15% recovery, pH 7.5 after 24 hours. Individual flux may vary +25%/ -15%.
Operating and Design Parameters

Membrane: Thin Film Membrane (TFM®)
Typical Operating Pressure: 200 psig
Maximum Pressure: 450 psig
Maximum Temperature: 122°F
Chlorine Tolerance: 1,000 ppm-hrs, dechlorination recommended
Optimum Rejection pH: 7.0 -7.5
Operating pH Range: 4.0 - 11.0
Cleaning pH Range: 2.0 - 11.5
Maximum Pressure Drop: 10 psig (69 kPa) per element
50 psig (345 kPa) per vessel
Feed NTU: <1
Feed SDI: <3
Typical Operating Flux: 10-20 GFD (15-35) L.H-1.M-2